3 Inch Extension plus built in variable Angle T-Bar, this works well as the Locking mechanism is good and the T-bar does not move once you set it up.

A good solid straight v-bar made from aluminium and includes bolt 5/16 thread

Black only

15 degree Flat 5/16 Thread.

The Beiter V-Bar is the complement to the Beiter Extender with Pins and completes the Beiter Centralizer Stabilizer System. Thanks to the Beiter V-Bar all other components - Long Rod, Side Rods, Extender with Pins or Extender 1 1/4"- can show up as a system which allows an optimal balance, dampening and absorption of vibrations.

The Beiter V-Bar is available in Black

Side Rods do offer in combination with a V-Bar System a better horizontal stability and are reducing additional vibrations. One Side Rod can also be added in front of the bow, e.g. as Hunting Stabilizer. Beiter Centralizer Side Rods are available in 10"

The Centralizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made from high quality thermoplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, thus giving the archer less problems while aiming and performing the shot.
The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.

Short 10" rods to match the Balkan multi rod stabiliser above.

Black only

Part of the Balkan range of products. This V Bar is specially designed to attach to the Cartel Balkan 4 rod stabilizer providing you with the option of adjusting the position of your short rods.

Normally available in stock in

Black colour only.

SVL limb savers designed for recurve bows.  (2 per pack)

Recurve Ultra 3010

Solid Limb Ultra 3421 

A great new weight set that has been inspired by Liam Grimwood.

At just 1 1/4" long the 4 part sets weigh in at 4.25oz.  Liam was keen to be able to add weight , but also to have the ability to keep the weight close to where it was needed.

Each set comprises a Collar, Single Mid Weight, Double Mid Weight and a Cap Weight and 2x 3/4" long by 1/4" thread studs.

With some rods you may need to adjust the 1/4" thread stud that sticks out to accept the weights.

These weights are currently being used by Liam, Larry Godfrey and Alison Williamson